Conceptual Research on a Mono-Biplane Aerodynamics-Driven Morphing Aircraft

The operation of aircrafts with high aspect ratio wings is usually vulnerable to low-standard airports and bad weather. A new concept for a mono-biplane aerodynamics-driven morphing aircraft is proposed. The movable and fixed wings form a biplane mode during takeoff and landing, while they form a high aspect ratio monoplane mode when cruising. This novel form of morphing can obtain a high cruise L/D while reducing nearly 50% of the takeoff and landing wingspan. However, the wing area is kept unchanged while morphing. The aerodynamic force on the movable wing is controlled by the deflection of the flaps to drive the morphing. No additional driving actuator is needed. In this way, although the morphing scale is large, the penalty on the complexity, structural strength, weight, and internal space of the wing is low. Taking the RQ-4A “Global Hawk” as the design baseline, morphing of the mono-biplane could further extend the cruise wingspan and aspect ratio for a better range without increasing the takeoff and landing span. When the wingspan was restricted, it was shown that this morphing scheme could reach a range extension of more than 50% when compared with an aircraft with the same wing load and different layouts. The feasibility of this mono-biplane aerodynamics-driven morphing concept was initially verified through ground vehicle tests. The possible influence of the morphing process on aircraft stability and control is also discussed