Research on the Adaptability of High-Performance Film for Full Recycling to the Curl-Up Film Collecting Method

Given the problem of the low tensile performance of the plastic film used in China, which brings about difficulties in curl-up film collecting, in this study, a contrast test was carried out on the tensile property of high-performance film for full recycling and the ordinary polyethylene film (PE film) that is used extensively in China. Test results showed that, within the service period, the elongation at break and tensile yield stress of the high-performance film were higher than those of ordinary polyethylene film, and, within the film-laying period of 0~30 days, the reduction scale of the elongation at break and tensile yield stress was higher than that within the film-laying period of 30~180 days. In this study, in order to obtain the lowest tensile performance of the film by curl-up film collecting, the operation principles of the curl-up film collectors were analyzed. The test on the force of curling up the film in the process of overcoming the force between the film and soil was analyzed. Test and analysis results showed that, for different sampling positions, film pick-up angles, and film types, the tensile stress on the film while pulling it up was within a range of 15.97~21.86 MPa. In order to verify the curling up effect of differently structured film collectors on different types of film with different thicknesses, a field test on film curl-up collecting was designed. A contrast test was carried out on two types of curl-up film collectors, 1JRM-2000 and 11SM-1.2, and the test results showed that the film recycling rate and working performance on the film laid in the same year by the film collector with a fixed film pick-up angle were higher than those for varying film pick-up angles. The curl-up film collector fixed with an automatic film-guiding mechanism is not affected by the velocity difference between the linear velocity of the film curl-up mechanism and the advancing velocity of the machine. The film recycling rate and working performance on the film laid in the same year by the 11SM-1.2 curl-up film collector can meet the operational requirements for collecting high-performance film with thicknesses of 0.008 mm and 0.01 mm. This research can provide a reference for simplifying the structure of residual plastic film collectors, increasing the film recycling rate, and reducing the cost