The sensitivity to relative humidity (RH) variations in the range 0%-90% of a platinum polyyne, namely poly-[1,4-dihexadecyloxy-2,5-diethynylbenzene-bis(triphenylphosphine) platinum(II)] (Pt-P-HDOB) membrane was investigated by means of a surface acoustic wave (SAW) based sensor. A thin film of polymeric membrane was spin deposited on the free surface of the device and the resulting acoustic velocity and attenuation perturbations allowed the acoustic characterization of the membrane by means of the perturbation theory. The SAW sensor was able to reveal even very low (<10% RH) humidity conditions at room temperature, with high reproducibility, repeatability and stability. (C) 2002 American Institute of Physics
With the development of industries, there is a growing need for sensitive, accurate, and inexpensive...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...
A surface acoustic wave (SAW) sensor, based on a polymeric sensitive membrane, has been realized for...
The response of a surface acoustic wave (SAW) device towards relative humidity (RH) variations in th...
A device for surface acoustic wave (SAW) measurements, based on a polymeric sensitive membrane, that...
A device for surface acoustic wave (SAW) measurements, based on a polymeric sensitive membrane, that...
We have investigated chemical sensing properties of three polymeric films (organic and organometalli...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A polymer-coated surface-acoustic-wave dual delay line oscillator of 50MHz fundamental frequency has...
Improved humidity sensors can make drying processes much more efficient, resulting in large energy s...
The nanostructured conjugated polymer poly[1,1'-bis(ethynyl)-4,4'-biphenyl-(bis-tributylphosphine) P...
This report summarizes the results of a Laboratory Directed Research and Development (LDRD) effort t...
With the development of industries, there is a growing need for sensitive, accurate, and inexpensive...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...
A surface acoustic wave (SAW) sensor, based on a polymeric sensitive membrane, has been realized for...
The response of a surface acoustic wave (SAW) device towards relative humidity (RH) variations in th...
A device for surface acoustic wave (SAW) measurements, based on a polymeric sensitive membrane, that...
A device for surface acoustic wave (SAW) measurements, based on a polymeric sensitive membrane, that...
We have investigated chemical sensing properties of three polymeric films (organic and organometalli...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A new surface acoustic wave humidity sensor has been developed and tested. It is based on the use of...
A polymer-coated surface-acoustic-wave dual delay line oscillator of 50MHz fundamental frequency has...
Improved humidity sensors can make drying processes much more efficient, resulting in large energy s...
The nanostructured conjugated polymer poly[1,1'-bis(ethynyl)-4,4'-biphenyl-(bis-tributylphosphine) P...
This report summarizes the results of a Laboratory Directed Research and Development (LDRD) effort t...
With the development of industries, there is a growing need for sensitive, accurate, and inexpensive...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...
The use of different types of surface modified polymers such as polyethylene (PE) and polypropylene ...