The paper presents the results of experimental tests performed with impulse voltage with short tail (STLI: 1.2/4 μs) on composite insulators in use in the MV distribution lines and electric traction lines. The voltage-time to breakdown characteristics under 1.2/4 μs waves are presented and compared with the characteristics under standard lightning impulse (LI: 1.2/50 μs). Models based on the disruptive effect, as proposed by Kind [9], and modified by Chowdhuri [13], are also considered and applied in order to predict the Volt-time characteristics under standard and non standard lightning voltages. The viability of the application of these models to the tested insulators is considered and discussed
The impulse breakdown attributes are of rudimentary importance in the insulation coordination in the...
Insulators with semi-conducting glazes (SCG insulators) are used mainly in heavily polluted areas. B...
The impulse breakdown voltage-time to flashover (V-t) characteristics of a point-plane gap in SF6 ha...
Overhead distribution lines are often exposed to lightning overvoltages, whose waveforms vary widely...
At present, the insulation performances of electrical apparatus under lightning impulse voltages are...
Various analytical methods are available for predicting the performance of insulation stressed by li...
Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an imp...
Previous experimental studies of lightning-impulse electric strength have used the method proposed i...
Considering the performance of insulators versus lightning effects is an important issue for insulat...
The flashover performance of insulators is the foundation of the calculation of precise lightning pr...
Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an imp...
The flashover performance of insulators is the foundation of the calculation of precise lightning pr...
Lightning can cause flashovers on Medium Voltage (MV) lines from both direct and nearby strikes. The...
Lightning can cause flashovers on Medium Voltage (MV) lines from both direct and nearby strikes. The...
Abstract: The concentrated dry bands on many silicone rubber insulators and also on porcelain insula...
The impulse breakdown attributes are of rudimentary importance in the insulation coordination in the...
Insulators with semi-conducting glazes (SCG insulators) are used mainly in heavily polluted areas. B...
The impulse breakdown voltage-time to flashover (V-t) characteristics of a point-plane gap in SF6 ha...
Overhead distribution lines are often exposed to lightning overvoltages, whose waveforms vary widely...
At present, the insulation performances of electrical apparatus under lightning impulse voltages are...
Various analytical methods are available for predicting the performance of insulation stressed by li...
Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an imp...
Previous experimental studies of lightning-impulse electric strength have used the method proposed i...
Considering the performance of insulators versus lightning effects is an important issue for insulat...
The flashover performance of insulators is the foundation of the calculation of precise lightning pr...
Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an imp...
The flashover performance of insulators is the foundation of the calculation of precise lightning pr...
Lightning can cause flashovers on Medium Voltage (MV) lines from both direct and nearby strikes. The...
Lightning can cause flashovers on Medium Voltage (MV) lines from both direct and nearby strikes. The...
Abstract: The concentrated dry bands on many silicone rubber insulators and also on porcelain insula...
The impulse breakdown attributes are of rudimentary importance in the insulation coordination in the...
Insulators with semi-conducting glazes (SCG insulators) are used mainly in heavily polluted areas. B...
The impulse breakdown voltage-time to flashover (V-t) characteristics of a point-plane gap in SF6 ha...