We fabricate and characterize substrate-transferred single-crystal mirror coatings with 9.33 $\pm$ 0.17 ppm of transmittance and 4.27 $\pm$ 0.52 ppm of excess optical loss, corresponding to a transmission-loss dominated reflectance of 99.9986% at 4.45 $\mu$m. For the first time, a cavity finesse > 200 000 is achieved in the mid-infrared.Comment: Sept 21: Minor revisions to conform to 2-page length requirement including abbr. refs.; Figure font sizes increase
Frequency up-conversion is an effective method of mid-infrared (MIR) detection by converting the lon...
présenté par A. RemillieuxLarge mirrors (350 mm), having extremely low optical loss (absorption, sca...
The final publication is available at http://iopscience.iop.org/2040-8986/13/12/125502/International...
Low excess optical loss, combined absorption and scatter loss, is a key performance metric for any h...
The Fabry-P\'erot resonator is one of the most widely used optical devices, enabling scientific and ...
Modern imaging systems can be enhanced in efficiency, compactness, and application through introduct...
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cutting...
The final publication is available at www.springerlink.comInternational audienceSeveral designs of s...
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical f...
A key application for thin film coatings, minimizing Fresnel reflections from each surface is critic...
The most precise measurement tools of humankind are equipped with ultra-stable lasers. State-of-the-...
Characterizations of low-loss mirrors by measurements of cavity-decay time and of cavity finesse are...
A broadband two-layer anti-reflection (AR) coating was developed for use on a sapphire half-wave pla...
This paper will describe efforts at developing broadband mirror coatings with high performance that ...
Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encounte...
Frequency up-conversion is an effective method of mid-infrared (MIR) detection by converting the lon...
présenté par A. RemillieuxLarge mirrors (350 mm), having extremely low optical loss (absorption, sca...
The final publication is available at http://iopscience.iop.org/2040-8986/13/12/125502/International...
Low excess optical loss, combined absorption and scatter loss, is a key performance metric for any h...
The Fabry-P\'erot resonator is one of the most widely used optical devices, enabling scientific and ...
Modern imaging systems can be enhanced in efficiency, compactness, and application through introduct...
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cutting...
The final publication is available at www.springerlink.comInternational audienceSeveral designs of s...
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical f...
A key application for thin film coatings, minimizing Fresnel reflections from each surface is critic...
The most precise measurement tools of humankind are equipped with ultra-stable lasers. State-of-the-...
Characterizations of low-loss mirrors by measurements of cavity-decay time and of cavity finesse are...
A broadband two-layer anti-reflection (AR) coating was developed for use on a sapphire half-wave pla...
This paper will describe efforts at developing broadband mirror coatings with high performance that ...
Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encounte...
Frequency up-conversion is an effective method of mid-infrared (MIR) detection by converting the lon...
présenté par A. RemillieuxLarge mirrors (350 mm), having extremely low optical loss (absorption, sca...
The final publication is available at http://iopscience.iop.org/2040-8986/13/12/125502/International...