Design of Dual-Mode Loop Resonator-Based Microwave Diplexers with Enhanced Performance

In this paper, a dual-mode loop resonator based circuit topology is studied for microwave diplexer applications. Several diplexers, with dense and sparse channel separations, are further discussed based on the introduced topology, featuring capable of controlling transmission zeros flexibly. Hence microwave diplexers with high selectivity and good channel isolation can be realized by placing transmission zeros of the channel filters at the desired channels. With the use of the proposed topology, the achieved center frequency ratio between two channels can be from 1.03 to 1.35 with good isolations, high selectivity and compact size. The demonstration diplexers are realized on PCB processes, but can be implemented with other media including MMIC. Experimental validations on the developed demonstrator are presented in the paper, and measured responses match well the full-wave electromagnetic simulated results. The developed UMTS diplexer demonstrator achieves the measured minimum passband insertion losses of 2.55 and 2.7 dB with return losses better than 15 dB and channel isolations over 40 dB at the two channels