Mathematical Modeling of the Dynamic Temperature Profile in Geothermal-Energy-Heated Natural Gas Hydrate Reservoirs

An analytical model was developed in this study for predicting the dynamic temperature profile in natural gas hydrate (NGH) reservoirs that receive heat energy from a geothermal layer for accelerating gas production. The analytical model was validated by a comparison of its result to the result given by a numerical model. The expression of the analytical model shows that, for a given system, the heat transfer is proportional to the mass flow rate and the temperature drop along the heat dissipator wellbore. Applying the analytical model to the NGH reservoir in the Shenhu area, Northern South China Sea, allowed for predicting the dynamic temperature profile in the NGH reservoir. The model result reveals that the NGH reservoir temperature should increase quickly at any heat-affected point, but it should propagate slowly in the radial direction. It should take more than two years to dissociate NGH within 20 m of the heat dissipator wellbore due to only thermal stimulation. Therefore, the geo-thermal stimulation method should be used as a technique for accelerating gas production with a depressurization scheme. The formation of gas phase due to the NGH dissociation should reduce the thermal conductivity of the NGH reservoir, while the water phase that dropped out from the dissociation should increase the thermal conductivity. The resultant effect should be investigated in the future in laboratories and/or numerical simulation of the dynamic water-gas two-phase flow coupled with a heat–transfer mechanism