Not Available

Not AvailableThis paper evaluates the biosorption of toxic metal ions onto the bioadsorbents derived from mango (Mangifera indica) and guava (Psidium guiag) barks and their metal fixation mechanisms. Maximum metal biosorption capacities of the mango bioadsorbent were found in the following increasing order (mg/g): Hg (16.24) < Cu (22.24) < Cd (25.86) < Pb (60.85). Maximum metal biosorption capacities of guava bioadsorbent follow similar order (mg/g): Hg (21.48) < Cu (30.36) < Cd (32.54) < Pb (70.25), but with slightly higher adsorption capacities. The removal mechanisms of heavy metals using bioadsorbents have been ascertained by studying their surface properties and functional groups using various spectrometric, spectroscopic, and microscopic methods. Whewellite (C2CaO4·H2O) has been identified in bioadsorbents based on the characterization of their surface properties using X-ray techniques (XPS and XRD), facilitating the ion exchange of metal ions with Ca2+ bonded with carboxylate moieties. For both the bioadsorbents, the Pb2+, Cu2+, and Cd2+ are biosorbed completely by ion exchange with Ca2+ (89-94%) and Mg2+ (7-12%), whereas Hg2+ is biosorbed partially (57-66%) by ion exchange with Ca2+ (38-42%) and Mg2+ (19-24%) due to involvement of other cations in the ion exchange processes. Bioadsorbents contain lignin which act as electron donor and reduced Cr(VI) into Cr(III) (29.87 and 37.25 mg/g) in acidic medium. Anionic Cr(VI) was not adsorbed onto bioadsorbents at higher pH due to their electrostatic repulsion with negatively charged carboxylic functional groups.Not Availabl