Dynamic Mechanics and Crystal Structure Fracture Characteristics of Rock-like Materials in Coal Mines

Deep rock bears dynamic loads such as machinery, blasting and disturbance in the mining process. The dynamic fracture mechanism of deep rock is a necessary prerequisite for engineering design and analysis. To study the dynamic fracture mechanism of rock under high in situ stress, deep mudstone and sandstone were selected as research objects. The dynamic mechanical properties and energy dissipation of mudstone sandstone were assessed by using a 50 mm diameter separated Hopkinson test device. According to the similarity criterion, the similarity of strength was assumed as primary factor to prepare similar model materials. Then, dynamic mechanical tests of these similar materials were carried out under dynamic compression splitting and active confining pressure. The results show that materials similar to mudstone and sandstone mainly show axial fracture tensile failure and crushing failure. Both the average strain rate dynamic strength and peak strain of these similar materials increase with increasing impact pressure, and the dynamic strength of similar materials increases exponentially with increasing strain rate. This result is consistent with the regularity of original rock. The dynamic splitting of mudstone-like materials is dominated by the failure of intermediate cracks, and sandstone-like materials also show secondary cracks in addition to intermediate splitting cracks. The dynamic peak strength of mudstone-like materials increases with increasing active confining pressure, and the dynamic peak strength of sandstone-like materials increases nearly twofold under the action of active confining pressure