Experimental Study on Effects of Additional Prestressing Using Fiber Reinforced Polymers and Strands on Deterioration of PSC Bridge Structure

Concrete bridge structures require reinforcement, as their performance deteriorates over time. In this regard, this study evaluated the effect of additional prestressing using fiber-reinforced polymers (FRPs) and strands applied to a demolished, deteriorated bridge. In particular, specimens were prepared for a bridge subjected to non-, near-surface mounted (NSM), and external prestressing (EP) strengthening to evaluate the stiffness and safety of the structure. In the 200–400 kN load range, the EP method exhibited the highest stiffness (15 kN/mm), followed by non-strengthening (8.5 kN/mm) and the NSM method (5.45 kN/mm). The EP method increased the stiffness by approximately two times; however, the NSM method decreased the stiffness by 0.6 times. In the 400–800 kN load range, the EP and NSM methods yielded stiffness values of 2.58 and 0.7 kN/mm, respectively. These results confirm that the EP method reinforces the structure. The results of this study are expected to be used as basic data to reinforce deteriorated bridges in actual operation