Add to ORKGAn infra-red technique for measuring wire temperature profiles under simulated reaction conditions was developed. Simulation of reaction conditions was achieved by passing air at Reynolds' numbers of 9.75, 10.4, and 11 across an electrically heated platinum wire in a reactor. [...]Chemical and Biomolecular Engineering, Department o
Paper presented at the NATO Advanced Research Workshop 'New Trends in Instrumentation for Hypersonic...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1964.MICROFIC...
International audienceThermal conductivity is a key property that must be known for proper design, t...
The phenomenon of localized temperature fluctuations on catalytic platinum wires, known in industry ...
The filament temperature T is a key parameter in hotwire-assisted chemical vapor deposition (HWCVD)....
The goal of this work is to provide experimental measurements of thermal conductivity of water, ethy...
In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National ...
When a bonding wire becomes too hot, it fuses and fails. The ohmic heat that is generated in the wir...
In this paper, we propose a temperature measurement method that uses ultrafine fluorescent wires to ...
The distribution of temperature along a thin rod or wire electrically heated in vacuo has been studi...
When light water reactor (LWR) is subject to a cold shutdown, it needs to be cooled with pure water ...
Thermal conductivity is a key property of interest for both nuclear fuel and structural materials, a...
This paper deals with the plasma flow shape depending on the electrode form of a gliding discharge p...
Random temperature fluctuations can be observed on the surface of catalytic wires when an exothermic...
This work describes the design of two contactless temperature measurement methods based on total rad...
Paper presented at the NATO Advanced Research Workshop 'New Trends in Instrumentation for Hypersonic...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1964.MICROFIC...
International audienceThermal conductivity is a key property that must be known for proper design, t...
The phenomenon of localized temperature fluctuations on catalytic platinum wires, known in industry ...
The filament temperature T is a key parameter in hotwire-assisted chemical vapor deposition (HWCVD)....
The goal of this work is to provide experimental measurements of thermal conductivity of water, ethy...
In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National ...
When a bonding wire becomes too hot, it fuses and fails. The ohmic heat that is generated in the wir...
In this paper, we propose a temperature measurement method that uses ultrafine fluorescent wires to ...
The distribution of temperature along a thin rod or wire electrically heated in vacuo has been studi...
When light water reactor (LWR) is subject to a cold shutdown, it needs to be cooled with pure water ...
Thermal conductivity is a key property of interest for both nuclear fuel and structural materials, a...
This paper deals with the plasma flow shape depending on the electrode form of a gliding discharge p...
Random temperature fluctuations can be observed on the surface of catalytic wires when an exothermic...
This work describes the design of two contactless temperature measurement methods based on total rad...
Paper presented at the NATO Advanced Research Workshop 'New Trends in Instrumentation for Hypersonic...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1964.MICROFIC...
International audienceThermal conductivity is a key property that must be known for proper design, t...