Pyrolysis Kinetics and Flammability Evaluation of Rigid Polyurethane with Different Isocyanate Content

Polyurethane (PU) is a typical product of the reaction between isocyanate and polyol, whose ratio would greatly influence material properties. In this paper, to investigate the influence of isocyanate on PU thermal stability and flammability, three kinds of rigid polyurethanes (RPUs) with different isocyanate ratio (1.05, 1.1, and 2.0) were manufactured in a laboratory and employed to have a series of TG (thermogravimetry), DSC (differential scanning calorimetry), and cone calorimetry tests. Kissinger’s method was used to calculate the activation energy and judge their stabilities. However, for such a complex degradation which consists of five reactions, it does not make sense by Kissinger method to obtain only two peak active energies. Considering complexity of PU degradation in air, genetic algorithm (GA) was employed to calculate kinetic triplets of five sub-reactions. The effects of isocyanate contents on each sub-reaction stability were obtained and then analyzed. By cone calorimeter testing, we found that great differences in heat release rate data. However, DSC analysis showed a complete opposite changed trend. Such difference is caused by DSC and calorimeter’s sample morphology, the former using grinded polyurethane powders but the latter polyurethane foam block