Numerical Analysis of Guided Waves to Improve Damage Detection and Localization in Multilayered CFRP Panel

Multilayered carbon fiber-reinforced polymers (CFRP) are increasingly used in aircraft components because of their superior mechanical properties. However, composite materials are vulnerable to impact loads, resulting in delamination-type damage which, if unnoticed, could lead to catastrophic structural failure. The objective of this research was to investigate possibilities to improve damage detection and the localization using signal processing methods. Numerical modeling using the semi-analytical finite element (SAFE) method was performed to obtain guided wave dispersion curves and to perform modal analysis. From the modal analysis, A0 mode for inspection of the composite with delamination type defects was selected. From the numerical simulation, A0 mode interaction with delamination along the longitudinal direction was analyzed and the location of the defect was estimated by measuring the time of flight (ToF) of the signal using Hilbert transform (HT) and continuous wavelet transform (CWT). The CWT has shown better results in estimating the delamination location compared with HT. The depth of delamination was characterized in the frequency domain by comparing the amplitude of the A0 mode. Inverse fast Fourier transform (IFFT) is recommended to reconstruct the reflected and transmitted modes for better damage detection and to reduce the complexity of signal interpretation