Add to ORKGThe magnetic properties of core materials ae investigated for a pulse width of 30 nanoseconds. Methods of testing which are necessitated by the sort pulse width are explained and the design of the pulser which is capable of 0.2 megawatt peak power is described. The data obtained if evaluated and presented for the various materials which were tested
The prototypes for the nominally 300 kV pulsed power supply and acceleration cell were built and tes...
A pulsed N.M.R. spectrometer capable of operating over the frequency range 40 Mhz. to 100 Mhz. has b...
A pulsed field magnetometer (PFM) for industrial applications was developed. The system has a capaci...
Presented at A.I.E.E. Winter General Meeting, New York, January, 1953.Magnetic materials are attract...
Abstract It is difficult to measure the magnetisation characteristics of magnetic powder cores with ...
Magnetic materials, both hard and soft, are used extensively in several components of particle accel...
The design of a new pulsed magnet system for the generation of intense electron beams is presented. ...
Most of the volume in classical electrical machines is occupied by magnetic materials for creating a...
The measurements of mechanical properties of electrotechnical materials applied in pulsed magnet des...
A superconducting wavelength shifter (SWLS) will be installed at the SRRC (Synchrotron Radiation Res...
Understanding the magnetic field topology in wire-array Z-pinches is of great sig-nificance for thei...
The number of particles in the beams used at CERN is measured by a family of devices called the Beam...
This investigation details the development of two pulsed field magnetometers which allow novel measu...
There is increasing demand for more and more energy efficient magnetic cores to be used in modern el...
The paper attempts to investigate the properties of the magnetic materials used in the construction ...
The prototypes for the nominally 300 kV pulsed power supply and acceleration cell were built and tes...
A pulsed N.M.R. spectrometer capable of operating over the frequency range 40 Mhz. to 100 Mhz. has b...
A pulsed field magnetometer (PFM) for industrial applications was developed. The system has a capaci...
Presented at A.I.E.E. Winter General Meeting, New York, January, 1953.Magnetic materials are attract...
Abstract It is difficult to measure the magnetisation characteristics of magnetic powder cores with ...
Magnetic materials, both hard and soft, are used extensively in several components of particle accel...
The design of a new pulsed magnet system for the generation of intense electron beams is presented. ...
Most of the volume in classical electrical machines is occupied by magnetic materials for creating a...
The measurements of mechanical properties of electrotechnical materials applied in pulsed magnet des...
A superconducting wavelength shifter (SWLS) will be installed at the SRRC (Synchrotron Radiation Res...
Understanding the magnetic field topology in wire-array Z-pinches is of great sig-nificance for thei...
The number of particles in the beams used at CERN is measured by a family of devices called the Beam...
This investigation details the development of two pulsed field magnetometers which allow novel measu...
There is increasing demand for more and more energy efficient magnetic cores to be used in modern el...
The paper attempts to investigate the properties of the magnetic materials used in the construction ...
The prototypes for the nominally 300 kV pulsed power supply and acceleration cell were built and tes...
A pulsed N.M.R. spectrometer capable of operating over the frequency range 40 Mhz. to 100 Mhz. has b...
A pulsed field magnetometer (PFM) for industrial applications was developed. The system has a capaci...