Finite Element Modeling Approaches, Experimentally Assessed, for the Simulation of Guided Wave Propagation in Composites

Today, structural health monitoring (SHM) systems based on guided wave (GW) propagation represent an effective methodology for understating the structural integrity of primary and secondary structures, also made of composite materials. However, the sensitivity to damage detection promoted by these systems can be altered by such factors as the geometry of the monitored parts, as well as the environmental and operational conditions (EOCs). Experimental investigations are fundamental but require a long time period and are costly, especially for tests in real-life scenarios. Experimentally validated simulations can help designers to improve SHM effectiveness due to the possibility of further broadening study on the different geometries, load cases, and material types with less effort. From this point of view, this paper presents two finite element (FE) modeling approaches for the simulation of GW propagation in composite panels. The case study consists of a flat and a curved composite panel. The two approaches herein investigated are based on implicit and explicit finite element analysis (FEA) formulations. The comparison of the predicted measures against the experimental dataset allowed the assessment of the levels of accuracy provided by both modeling approaches with respect to the dispersion curves. Furthermore, to assess the different curvature sensitivities of the proposed numerical and experimental approaches, the extracted dispersion curves for both flat and curved panels were compared