Insights into the formation mechanism of hard sludge on the secondary side of PWR steam generators

International audienceIn the secondary circuit of nuclear Pressurized Water Reactors, corrosion products and impurities lead to the formation of undesirable hard deposits, called hard sludge, on the tube sheet of steam generators. Theses deposits are mainly composed of iron (magnetite), alumina and silica. The formation of hard sludge piles is investigated by reproducing the reaction of precursor oxides in the conditions of the steam generator (275°C, 58 bar). Mixtures of magnetite, -alumina and amorphous silica in binary or ternary systems in an alkaline ethanolamine-ammonia solution at pH25°C = 9.6 are studied. Carbon steel was tested as an alternative source of iron. The analysis of the evolution of the suspensions, completed by the industrial feedback, allows to explain the process of hard sludge formation in the steam generators. The following sequence is proposed: sedimentation of magnetite / confinement of the interstitial fluid / concentration of aqueous species such as aqueous silica and alumina / sorption of Al on magnetite and/or growth of boehmite / reaction with aqueous silica to form kaolinite as a resistant cement. Once formed, the kaolinite cement tends to densify over time while magnetite is passive. The absence of Fe-2 phyllosilicates predicted by thermodynamics is explained by the low solubility of magnetite making unfavorable the precipitation of Fe-silicate. By contrast, metallic iron is not stable at contact with water and the continual production of divalent iron, whose solubility is much higher than that of magnetite, allows to overpass a threshold concentration what makes possible the precipitation of a berthierine layer at the surface of corroded steel. This layer constitutes the nucleation site for the further precipitation of other aluminosilicates