Development of a portable instrument for non-destructive characterization of the polymers viscoelastic properties

The non-destructive quantification of the mechanical properties of solid materials is a growing research topic for many applications. It could be used for monitoring material performance during the whole lifecycle of a component, for when sampling is limited or impossible or for applications that require sample identification. In this paper a portable instrument for non-destructive viscoelastic characterization of polymers, based on instrumented indentation, is presented, its aim is to allow a real-time assessment of viscoelastic storage and loss moduli (E’ and E”) directly in-situ. The designed architecture of the device is described in details alongside the procedure adopted for testing polymers, the corresponding signal processing procedure for the identification of materials stiffness and damping parameters is also described. For the scope of this paper the aforementioned procedure was tested on two different rubber compounds. Finally, the storage and loss moduli are calculated based on the linear viscoelasticity theory and the results are compared to the ones obtained with the standard Dynamic Mechanical Analysis technique (DMA): both these approaches show the same relative ranking between the compounds and a different trend in temperature due to the reached indentation depth. To overcome this limitation of linear viscoelasticity theory, normally valid for low indentation depths, a generalized formulation is proposed that takes into account the indentation depth on the moduli estimation. The results obtained with the generalized formulation show that this approach allows to evaluate accurately the trends and rankings of viscoelastic moduli, giving reliable results