A sensing torch for on-line monitoring of the gas tungsten arc welding process of steel pipes

Non-intrusive and real-time monitoring techniques are increasingly required by manufacturing industry in order to detect flaws in arc welding processes. In this work the development of an optical inspection system, for monitoring the manual gas tungsten arc welding (GTAW) process of steel pipes, is described. The arc plasma visible emission produced during the process was acquired and spectroscopically analysed. Measuring the intensities of selected argon emission lines allowed real time calculation and recording of the axial electron temperature of the plasma. Experimental results showed that the temperature signal varies greatly in the case of instabilities of the weld pool that cause weld defects. A suitable algorithm, based on a statistical analysis of the signal, was developed in order to real time flag defective joints. It is shown that several weld defects such as porosity,dropout, lack of fusion, solid inclusions and craters were successfully detected in a production environment. The performances of the optical sensor were compared with the results of state-of-the-art post-weld controls such as x-rays and penetrating dyes, showing good agreement and thus demonstrating the validity of this quality monitoring system