Add to ORKGUnder fire conditions, ventilation and air-conditioning systems should be compatible with smoke control systems and need to be considered in their respective design
Includes requirements, test methods, evaluation and conformity and marking for fire dampers
In a coal mine when sealed off area having connection with atmosphere (surface) and intake airways o...
Despite the provisions described, it is probable that some smoke will get into the common corridor o...
It is recognised that smoke is the major killer in most fires. In buildings with mechanical heating,...
A fire and smoke damper should be provided where ductwork enters or leaves each section of the prote...
Details are given for methods of test and the requirements for powered smoke and heat control ventil...
Details requirements, test methods and labelling for natural smoke and heat exhaust ventilators, to ...
Ductwork should not help to transfer fire and smoke through the building. Terminals of exhaust point...
Guidance on the design of smoke control systems that use pressure differentials is available in BS E...
All of the following precautions should be taken to avoid the spread of smoke and fire to the protec...
Thermal gradients, wind pressure and mechanical ventilation systems determine a natural airflow trav...
Basic information on the location of fire protection measures may be sufficient. An as-built plan of...
In the event of a fire, smoke migrates from the fire floor to upper floors mainly through vertical s...
These are designed to hold back smoke at a leaky physical barrier in a building, such as a door (eit...
It is well known that smoke and toxic gases are the major killers associated with all fires. Modern...
Includes requirements, test methods, evaluation and conformity and marking for fire dampers
In a coal mine when sealed off area having connection with atmosphere (surface) and intake airways o...
Despite the provisions described, it is probable that some smoke will get into the common corridor o...
It is recognised that smoke is the major killer in most fires. In buildings with mechanical heating,...
A fire and smoke damper should be provided where ductwork enters or leaves each section of the prote...
Details are given for methods of test and the requirements for powered smoke and heat control ventil...
Details requirements, test methods and labelling for natural smoke and heat exhaust ventilators, to ...
Ductwork should not help to transfer fire and smoke through the building. Terminals of exhaust point...
Guidance on the design of smoke control systems that use pressure differentials is available in BS E...
All of the following precautions should be taken to avoid the spread of smoke and fire to the protec...
Thermal gradients, wind pressure and mechanical ventilation systems determine a natural airflow trav...
Basic information on the location of fire protection measures may be sufficient. An as-built plan of...
In the event of a fire, smoke migrates from the fire floor to upper floors mainly through vertical s...
These are designed to hold back smoke at a leaky physical barrier in a building, such as a door (eit...
It is well known that smoke and toxic gases are the major killers associated with all fires. Modern...
Includes requirements, test methods, evaluation and conformity and marking for fire dampers
In a coal mine when sealed off area having connection with atmosphere (surface) and intake airways o...
Despite the provisions described, it is probable that some smoke will get into the common corridor o...