PRODUCTION OF A SINGLE-STAGE REDUCER USING THE FDM METHOD OF ADDITIVE TECHNOLOGY

Aditivna tehnologija svakim je danom sve više u upotrebi i od sve većeg značenja za gotovo sve grane industrije. Iako postoji mnogo različitih metoda aditivne tehnologije, u ovom radu opisana je FDM metoda. FDM je jedna od najpopularnijih i najkorištenijih metoda, a ujedno i jedna od prvih metoda u začecima same tehnologije. U ovom radu detaljno je opisana izrada jednostupanjskog reduktora FDM metodom aditivne tehnologije. Detaljno je opisana sama metoda, njene prednosti i mane, kao i proces izrade po koracima te uređaj i materijali koji su korišteni. Kao rezultat izrađen je 3D printani reduktor koji će se koristit kao ogledni primjerak koji će se koristiti u nastavnom procesu.Additive technology is more and more in use every day and of increasing importance for almost all branches of industry. Although there are many different methods of additive technology, this paper describes the FDM method. FDM is one of the most popular and used methods, and at the same time one of the first methods in the beginnings of the technology itself. This thesis describes in detail the production of a single-stage reducer using the FDM method of additive technology. The method itself, its advantages and disadvantages, as well as the step -by-step manufacturing process and the device and materials used are described in detail. As a result, a 3D printed reducer was created and will be used as a sample to be used in class