Researching the Efficiency of Buck Converter Synchronous Rectifier

The object of study is synchronous buck-voltage converter with digital control system. One of the most problematic things is energy changing and transmission in converters to reach certain numerical range with minimal losses in the components of the electrical circuit. An enormous calculated parameters of electrical scheme. There was advised and described both structure and electrical scheme of synchronous converter, which, thanks to digital system, provides dates with more accuracy connected with an impact on working scheme. There was shown detailed analysis example with a numerical value for the certain elements of electrical scheme. It's a fundament in order to choose certain parts of electrical scheme according to the certain categories.During research there was used selection of hardware and software tools: elements for buck-converter – key, diode and capacitor; certain voltage and frequency range for microcontroller; control of the power keys of the circuit with the corresponding operating parameters for driver. There was analyzed and calculated all over the possible losses during the process bucking of the voltage to the certain level, an enormous losses in the components of the converter electrical scheme – induction coil, keys and capacitors. It's an important part of synchronous buck-converter. There was calculated power losses and efficiency through the received graphics of keys commutation in electrical scheme. There were received graphic dependence of converter efficiency on output power; time characteristics of the control signal pulse-width modulation (PWM) and output voltage; dependence on the commutation losses. This is because advised synchronous converter has a set of features. Particularly analog to digital converter in the capacity of feedback, digital regulation system with a discrete step and rectification by replacing diodes with actively controlled switches. There are keys of low-side and high-side levels according to the passing voltage and current values. Therewith provides possibility for receiving more accuracy value. In comparison with analogic buck-converters, this converter has voltage parameter with fractional error