Tuning Rules for Active Disturbance Rejection Controllers via Multiobjective Optimization - A Guide for Parameters Computation Based on Robustness

[EN] A set of tuning rules for Linear Active Disturbance Rejection Controller (LADRC) with three different levels of compromise between disturbance rejection and robustness is presented. The tuning rules are the result of a Multiobjective Optimization Design (MOOD) procedure followed by curve fitting and are intended as a tool for designers who seek to implement LADRC by considering the load disturbance response of processes whose behavior is approximated by a general first-order system with delay. The validation of the proposed tuning rules is done through illustrative examples and the control of a nonlinear thermal process. Compared to classical PID (Proportional-Integral-Derivative) and other LADRC tuning methods, the derived functions offer an improvement in either disturbance rejection, robustness or both design objectives.This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under Grant RTI2018-096904-B-I00.Martínez, BV.; Sanchís Saez, J.; Garcia-Nieto, S.; Martínez Iranzo, MA. (2021). Tuning Rules for Active Disturbance Rejection Controllers via Multiobjective Optimization - A Guide for Parameters Computation Based on Robustness. Mathematics. 9(5):1-34. https://doi.org/10.3390/math90505171349