A slotted-circle patch metasurface that can efficiently absorb electromagnetic (EM) waves in three different bands is proposed. Simulation results show that the proposed structure can absorb signals in three different bands, namely at 8.10 GHz, 15.39 GHz and 19.7 GHz with absorption peaks of 99.8%, 99.7% and 99.8%, respectively. The 2-mm thick absorber is electrically thin, corresponding to λ/18 at its lowest operating frequency. The absorber can be used in many applications such as anechoic chambers, scattering control, photodetectors, microbolometers and solar cells
This paper reports, a metasurface absorber which is U-joint loaded Double Split O shaped with a squa...
A new development of metamaterial applications in radar absorbers for X band is introduced. Two modi...
A simple design of metamaterial absorber (MA) was proposed based on a periodic array of metal patch...
The data needed to replicate the proposed structures as well as generate the graphs presented in thi...
This paper presents the design, fabrication, and measurement of triple band metamaterial absorber at...
This article proposes a multiband metamaterial microwave absorber based on a split ring-slot structu...
Nowadays, more and more metamaterial absorbers (MMAs) are explored not only in the microwave band bu...
A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four small...
A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four small...
In this paper, a split ring-slot structure-based metamaterial absorber is introduced and investigate...
This paper presents the design, fabrication, characterization and experimental verification of a per...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
In this letter, we report the design, demonstration and discussion of a multi- and broad- band metam...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
This paper reports, a metasurface absorber which is U-joint loaded Double Split O shaped with a squa...
A new development of metamaterial applications in radar absorbers for X band is introduced. Two modi...
A simple design of metamaterial absorber (MA) was proposed based on a periodic array of metal patch...
The data needed to replicate the proposed structures as well as generate the graphs presented in thi...
This paper presents the design, fabrication, and measurement of triple band metamaterial absorber at...
This article proposes a multiband metamaterial microwave absorber based on a split ring-slot structu...
Nowadays, more and more metamaterial absorbers (MMAs) are explored not only in the microwave band bu...
A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four small...
A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four small...
In this paper, a split ring-slot structure-based metamaterial absorber is introduced and investigate...
This paper presents the design, fabrication, characterization and experimental verification of a per...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
In this letter, we report the design, demonstration and discussion of a multi- and broad- band metam...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were com...
This paper reports, a metasurface absorber which is U-joint loaded Double Split O shaped with a squa...
A new development of metamaterial applications in radar absorbers for X band is introduced. Two modi...
A simple design of metamaterial absorber (MA) was proposed based on a periodic array of metal patch...