Experimental research into uniformity in spreading mineral fertilizers with fertilizer spreader disc with tilted axis

Improving the efficiency in the work process of mineral fertilizer dressing is a topical problem in today’s agricultural industry. The authors have developed a design of the fertilizer spreading tool with a tilted axis and carried out field experiment investigations on it. It has been established by the results of the investigations that the non-uniformity in the spreading of mineral fertilizers along the line of their departure from the fertilizer spreading tool with a tilted axis is most strongly affected by the disc rotation frequency. The obtained results provide for selecting the optimum parameters and modes of operation for the tool under consideration in the situation, when it is installed in fertilizer placing machines. Also, it has been established that increasing the spreading disc rotation frequency in such a tool from 600 to 800 rpm results in the growth of the effective range of mineral fertilizer spreading along the placing line at a level of 10.5 m. Increasing the disc’s angle of inclination to the horizontal plane to 20º results in the rise of the effective fertilizer spreading range at a level of the 48th tray (24 m) inclusive as well as the increase of the distance between the tool and the tray that contains the maximum share of the spread fertilizers (5.1%) to 24 trays (12 m). At a constant rotation frequency of the disc in the tilted-axis fertilizer spreading tool, in all its kinematic modes of operation, an increase in the angle of its disc’s inclination to the horizontal plane results in the rise of the indices representing the distribution of the mineral fertilizers over the trays along the line of their placing. The width of the mineral fertilizer spreading can be controlled by adjusting the rotation frequency of the disc in the tilted-axis fertilizer spreading tool, when it is set at an angle to the horizontal plane, similar to how it is done in state-of-the-art fertilizer placing machines with horizontally positioned discs in their centrifugal spreading tools. The rotation frequency of the disc in the tilted-axis fertilizer spreading tool has the most significant effect on the coefficient of variation incidental to the distribution of the mineral fertilizers along the line of their placing