Impact of super absorbent polymers on early age behavior of high performance concrete walls

The prediction of the early age behavior of cementitious materials is a difficult task, because many of the material properties are very sensitive to curing conditions as it is the case for High Performance Concrete (HPC), which usually has a very low water to cement ratio (0.2 < w/c ≤ 0.3). Early age cracking, a common problem for HPC, is caused by Autogenous Shrinkage (AS) and self-desiccation during the cement hydration reactions when the deformation is restrained. However, to avoid the crack development initiated by AS, several solutions can be adopted; one example is the addition of a promising material considered as an internal curing agent, the Super Absorbent Polymers (SAP) which limits the capillary depressions that enhance the formation of the crack. In this study the main goal is to mitigate the shrinkage using SAPs in infrastructure under severe conditions. Therefore, a demonstrator wall was built simulating a typical case with high risk of cracking. With the help of fiber optic SOFO sensors embedded in the wall, real-time deformations are recorded and compared with the demountable mechanical strain gauges (DEMEC) measurements to further investigate the behavior of SAPs in real scale infrastructure. The amount of extra water (in SAP) needed to mitigate shrinkage was determined by performing chemical shrinkage tests on different cement paste combinations. Tests of autogenous shrinkage were performed on mortars using corrugated tubes and showed that SAPs reduce to some extent the AS. Under restrained conditions via ring tests, SAP specimens did not crack. Therefore, SAPs were found promising towards mitigating the shrinkage and enhancing the early age behavior of concrete for a better durability