In this work, thermodynamic functions of evaporation of copper chalcogenides (Cu2S, Cu2Se, and Cu2Te) are determined via previously published data and thermodynamic values obtained by the authors of the work. The obtained results indicate a very low probability of separation of compounds into copper and chalcogen by dissociation under vacuum-thermal processing conditions. Liquid-vapor phase transitions in binary systems Cu2S – Cu2Se, Cu2S – Cu2Te, and Cu2Se – Cu2Te at low pressures of 15 and 0,7 kPa are constructed based on the vapor pressure of copper chalcogenides. It is shown that the pressure eases over the liquid bath impairs the separation of chalcogens, therefore separation in one stage by thermo-vacuum treatment at a pressure of 0,7...
International audienceChloride and hydrosulfide are the principal ligands assumed to govern transpor...
A new method for the preparation of cuprous and silver sulphide, selenide and telluride is described...
Chloride and hydrosulfide are the principal ligands assumed to govern transport of copper in hydroth...
In this work, thermodynamic functions of evaporation of copper chalcogenides (Cu2S, Cu2Se, and Cu2Te...
An attempt was undertaken to describe the mechanism of dissociation of copper chalcogenides during m...
Tin selenide (SnSe) and copper indium diselenide (CuInSe2) compounds were synthesized by high temper...
Chemical deposition from aqueous environments has significant perspective among existing methods of ...
This paper describes an analysis of the Fe-Cu system from the perspective of determination of the in...
The heat capacity of CuS has been measured by adiabatic shield calorimetry from 5 to 840 K. The heat...
The oxidation mechanism of copper selenide was investigated at deselenization temperatures of copper...
The vapor pressure of pure copper and the partial vapor pressures of Cu over Cu-Fe, Cu-Pt and Cu-Fe-...
Aim of this study was to investigate the possibilities for a selective and efficient method to conve...
The heat capacity of Cu2S from 5 to 950 K was determined by adiabatic-shield calorimetry and the the...
A new method for description of thermodynamic properties of Cu-S mixtures is put forward. The basic ...
Addition of argon gas, with different flow rates, to vacuum evaporation deposition of film electrode...
International audienceChloride and hydrosulfide are the principal ligands assumed to govern transpor...
A new method for the preparation of cuprous and silver sulphide, selenide and telluride is described...
Chloride and hydrosulfide are the principal ligands assumed to govern transport of copper in hydroth...
In this work, thermodynamic functions of evaporation of copper chalcogenides (Cu2S, Cu2Se, and Cu2Te...
An attempt was undertaken to describe the mechanism of dissociation of copper chalcogenides during m...
Tin selenide (SnSe) and copper indium diselenide (CuInSe2) compounds were synthesized by high temper...
Chemical deposition from aqueous environments has significant perspective among existing methods of ...
This paper describes an analysis of the Fe-Cu system from the perspective of determination of the in...
The heat capacity of CuS has been measured by adiabatic shield calorimetry from 5 to 840 K. The heat...
The oxidation mechanism of copper selenide was investigated at deselenization temperatures of copper...
The vapor pressure of pure copper and the partial vapor pressures of Cu over Cu-Fe, Cu-Pt and Cu-Fe-...
Aim of this study was to investigate the possibilities for a selective and efficient method to conve...
The heat capacity of Cu2S from 5 to 950 K was determined by adiabatic-shield calorimetry and the the...
A new method for description of thermodynamic properties of Cu-S mixtures is put forward. The basic ...
Addition of argon gas, with different flow rates, to vacuum evaporation deposition of film electrode...
International audienceChloride and hydrosulfide are the principal ligands assumed to govern transpor...
A new method for the preparation of cuprous and silver sulphide, selenide and telluride is described...
Chloride and hydrosulfide are the principal ligands assumed to govern transport of copper in hydroth...