Microstructure and mechanical properties of commercially pure aluminum processed by accumulative back extrusion

Accumulative back extrusion ABE , as a new severe plastic deformation SPD method, was applied on a commercially pure aluminum, resulting in an ultrafine microstructure. The grain refinement was attributed to the shearing and or to the mechanical partitioning of the initial coarse grains as well as different dynamic recrystallization mechanisms i.e., discontinues and continues ones . The effects of imposing several passes along with the strain reversal path method during consecutive ABE passes were discussed. Mechanical characterization revealed that the yield and ultimate strength of pure Al were significantly increased through applying ABE. This was related to grain boundary and dislocation strengthening, as well as to Orowan dislocation bowing mechanisms. The elongation, however, was deteriorated after ABE processing. This was interpreted through the lack of ability of the material to accommodate the ABE induced strain, inhomogeneous distribution of strain across the ABE processed workpieces, and the reduced work hardening capacity of the fine grained aluminum. The formability index and static toughness were also considered to verify the overall mechanical performance of the ABE processed pure A