Numerical Investigation of Energy Saving Characteristic in Building Roof Coupled with PCM Using Lattice Boltzmann Method with Economic Analysis

Due to their characteristics of high energy storage density and a nearly constant melting temperature, phase change materials (PCMs) could be inserted into the roof of green buildings in order to reduce the energy consumption and ameliorate the room thermal comfort. In this paper, an enthalpy based multiple-relaxation-time (MRT) lattice Boltzmann method (LBM) was developed to calculate the transient phase change conjugate heat transfer with solar radiation inside the green building’s PCM roof in the hot summer and cold winter areas of China. The effect of the PCM melting temperature on the variation of the roof internal temperature was investigated and the energy saving characteristic of the PCM roof under an intermittent energy utilization condition was also analyzed by comparing with the performance of the roof filled with sensible insulating materials (SIMs). Then, the life cycle incremental costs and incremental benefits of a PCM roof and SIM roof were studied by using the comprehensive incremental benefit model so that the green building roof could be economically evaluated. The results indicate that a temperature rise inside the roof during summer cooling time could be delayed due to the latent heat of the PCMs. It was also found that the melting temperature and the thickness of the PCM layer should be chosen appropriately for enhancing the energy saving amount of a PCM roof. Based on this, the PCM roof could have a better energy saving capability than the SIM roof. During the winter heating time, as the environment temperature and the room temperature are both below the PCM melting temperature, the PCM roof does not have a latent heat characteristic so that it performs like a SIM roof. Furthermore, due to the high price of PCMs, the incremental cost of green building is increased, which makes the PCM roof have a negative comprehensive incremental benefit. Under this circumstance, developing PCMs with a low price and stable chemical properties is a key scientific bottleneck for a wider application of PCM roofs in the architecture engineering field