This study examined the synergic effect of alloying the element Cr and the environmental element Mg2+ ions on the corrosion property of a low-alloy steel in seawater at 60 °C, by means of electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR) tests and weight-loss tests. The Mg2+ ions in seawater played an important role in lowering the electron transfer of the rust layer in the Cr-containing steel. The corrosion resistance of the Cr-containing steel is superior to that of blank steel in Mg2+ ions containing seawater. XPS and XRD results indicated that the formation of MgFe2O4 and a mixed layer (Cr oxide + FeCr2O4 + MgCr2O4) improved the corrosion resistance of the low-alloy steel in the seawater
The results of study of influence of the chemical composition of steel, the structural condition and...
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
Due to the paramagnetic properties and the ability to passivation, for the production of hulls of so...
This study examined the synergic effect of alloying the element Cr and the environmental element Mg2...
The corrosion behavior of pure magnesium (Mg) immersed in 3.5 wt% NaCl and artificial seawater is ev...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
Corrosion behavior of mild steel in seawater from different sites was investigated by using weight l...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
High-strength low-alloy steels have been used prevalently in marine engineering and the defense indu...
With the development of ocean engineering, various metallic materials have been applied to the marin...
The corrosion rate of mild steel behavior exposed to effluents (EF), sea water (SW) and fresh water ...
In this work, the corrosion behavior of 30CrMnSiNi2A in a simulated marine environment was studied. ...
Corrosion behaviours of two HSLA-100 steels designated as GRV (having higher Cu and Ni content) and ...
THE CORROSION BEHAVIOR OF 2.25CR-1MO FERRITIC STEEL IN DIFFERENT CONCENTRATIONS (0.05-5N) OF SULFURI...
The results of study of influence of the chemical composition of steel, the structural condition and...
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
Due to the paramagnetic properties and the ability to passivation, for the production of hulls of so...
This study examined the synergic effect of alloying the element Cr and the environmental element Mg2...
The corrosion behavior of pure magnesium (Mg) immersed in 3.5 wt% NaCl and artificial seawater is ev...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
Corrosion behavior of mild steel in seawater from different sites was investigated by using weight l...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy...
High-strength low-alloy steels have been used prevalently in marine engineering and the defense indu...
With the development of ocean engineering, various metallic materials have been applied to the marin...
The corrosion rate of mild steel behavior exposed to effluents (EF), sea water (SW) and fresh water ...
In this work, the corrosion behavior of 30CrMnSiNi2A in a simulated marine environment was studied. ...
Corrosion behaviours of two HSLA-100 steels designated as GRV (having higher Cu and Ni content) and ...
THE CORROSION BEHAVIOR OF 2.25CR-1MO FERRITIC STEEL IN DIFFERENT CONCENTRATIONS (0.05-5N) OF SULFURI...
The results of study of influence of the chemical composition of steel, the structural condition and...
Effects of chromium and manganese as alloying elements on corrosion resistance of carbon steel were ...
Due to the paramagnetic properties and the ability to passivation, for the production of hulls of so...