Pick-and-Place Operation of Single Cell Using Optical and Electrical Measurements for Robust Manipulation

A robust pick and placement operation of a single cell is necessary for efficient sample collection. Detection and manipulation of single cells requires minimum invasiveness. We report a less-invasive method for picking up and placing single cells using optical and electrical observations for robust cell manipulation. We measured the ionic current through a glass pipette during a cell capture and release operation to detect its capture. Trapping a cell on the pipette tip by suction decreased the current and allowed the detection of cell capture within 1 s. A time-series ionic current was sensitive to the location of a cell and effective at detecting a single cell. A time-series ionic current had a higher signal-to-noise ratio than time-series microscope images. Cell membrane integrity was analyzed at the different capturing and voltage conditions. Serum protein coating shows improvement of a cell release from a pipette tip. Measurement of trajectory and distance of a cell reveals that the movement depends on an ejection flow and the flow in a dish. We achieved a pick-up and placement operation for single cells that was compatible with an open-top microwell while performing observations using optical microscopy and measurements using an electrical current