Large-Eddy simulation analysis of spark configuration effect on cycle-to-cycle variability of combustion and knock

Cycle-to-cycle variability is numerically simulated for high-speed, full-load operation of a turbocharged gasoline direct injection engine. Large-Eddy simulation is adopted to replicate the fluctuations of the flow field affecting the turbulent combustion. Experimental data were provided at knock onset, and large-Eddy simulation was validated for the same condition. In the original engine configuration, the spark plug is displaced toward the exhaust side, while the electrodes orientation is arbitrary. A 90 rotation is imposed to evaluate the effects of the aerodynamic obstruction caused by the electrode with respect to the flow field and the flame kernel growth. A second speculative analysis is performed modifying the position of the spark plug. The electrodes are shifted 2mm toward the intake side since this variation is compatible with the cylinder head layout. For both variations in orientation and position, the effects on the flow field around the spark plug are investigated. Statistical analysis is carried out on early flame kernel formation and knock tendency. The results highlight that the orientation of the electrodes affects the flow field for each cycle but plays a negligible role on the statistical cyclic variability, indirectly justifying the lack of an imposed orientation. As for the spark plug position, the numerical analysis indicate that the shifting of the electrodes toward the intake side slightly improves the knock limit mainly because of a reduction in in-cylinder peak pressure. In general, it is inferred that improvements may be achieved only through a simultaneous modification of the fuel jet orientation and phasing