A Suspended Six-Port Transformer-Based Power Divider for 2.4 GHz Applications

This paper presents a transformer-based power divider with six-port suspending structure for 2.4 GHz wireless applications. The proposed power divider, which is featured with chip size (2.9 mm × 2.8 mm × 21 μm), was constructed by an 8-μm-thick Cu bottom electrode, a 5 μm-height supporting copper post, and an 8-μm-thick suspended spiral copper conducting layer with a 13 μm air gap. The main structure included two transformers and six input/output matching capacitors for simultaneously achieving two single-to-differential paths so that the chip size of the complex multiple-ports transceiver could be reduced. According to the results, the proposed divider has characteristics of the radio frequency (RF), and its input return losses are around −10 dB, output return losses are beneath −10 dB, and minimum amplitude imbalance is below 1.5 dB and less than 1° phase imbalance at 2.4 GHz operating frequency