Rapid and accurate quantitative phase analysis using a fast detector

The accuracy of the weight fractions calculated with the Rietveld method for various polycrystalline systems using data collected for very short times (545 min) with an RTMS (real-time multiple strip) detector was verified. The weight estimates were compared with those obtained using the same conventional Bragg-Brentano geometry, a gas proportional detector and a 13 h data acquisition. The analysed samples were monophasic and polyphasic mixtures with different degrees of complexity: the standard corundum NIST 676; a sample (labelled 1g) provided as a standard sample for the IUCr CPD Quantitative Phase Analysis Round Robin; a natural pyroclastic rock from Riano (Rome, Italy) containing zeolitic minerals and a glass phase; and a hydraulic lime. The results of the refinements show estimated weights consistent with both those obtained with a gas proportional detector and with the nominal values, indicating a very good accuracy. Only when variable slits are used, the accuracy of the estimated weights slightly decreases. The outcome of this work is a very important step forward towards fast and accurate QPA for production control and quality management, obtained by combining the use of a rapid detector and existing user-friendly software