Results of a computational investigation of the flame propagation at the bases of lifted laminar jet diffusion flames are reported. The FLUENT code was used for both reacting and non-reacting laminar fuel jets. The effect of Schmidt number on flame lift-off phenomena of fuel diluted with inert gases is examined. For reacting cases, the flame propagation speed at the flame base was determined with variable lift-off heights for given fuels. Comparisons with existing theories are compared
The boundary-layer approximation is used to describe the frozen mixing process taking place when a f...
The liftoff characteristics of autoignited laminar dimethyl ether (DME) jet flames in heated coflow ...
This work reports experimental results from laminar-to-turbulent lifted jet diffusion flames. Charac...
Numerical calculations of the flame propagation speed and the Damkohler number (Da) at laminar lifte...
Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffu...
Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffu...
Numerical calculations of the flame propagation speed and the Damköhler number (Da) at laminar lifte...
International audienceLaminar diffusion flames lifted on round jets are simulated using high order a...
Many researchers have studied the stabilization of lifted turbulent jet diusion flames. Earlier work...
This paper addresses the numerical description of lifted flames in axisymmetric laminar coflow jets....
The characteristics of autoignited laminar lifted methane/hydrogen jet flames in heated coflow air a...
Liftoff heights of turbulent diffusion flames have been modeled using the laminar diffusion flamelet...
[[abstract]]A detailed regime diagram for bluff-body stabilized flames is proposed for the flame lif...
A theoretical analysis of turbulent jet diffusion flames is developed in which the flame is regarded...
The boundary-layer approximation is used to describe the frozen mixing process taking place when a f...
The boundary-layer approximation is used to describe the frozen mixing process taking place when a f...
The liftoff characteristics of autoignited laminar dimethyl ether (DME) jet flames in heated coflow ...
This work reports experimental results from laminar-to-turbulent lifted jet diffusion flames. Charac...
Numerical calculations of the flame propagation speed and the Damkohler number (Da) at laminar lifte...
Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffu...
Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffu...
Numerical calculations of the flame propagation speed and the Damköhler number (Da) at laminar lifte...
International audienceLaminar diffusion flames lifted on round jets are simulated using high order a...
Many researchers have studied the stabilization of lifted turbulent jet diusion flames. Earlier work...
This paper addresses the numerical description of lifted flames in axisymmetric laminar coflow jets....
The characteristics of autoignited laminar lifted methane/hydrogen jet flames in heated coflow air a...
Liftoff heights of turbulent diffusion flames have been modeled using the laminar diffusion flamelet...
[[abstract]]A detailed regime diagram for bluff-body stabilized flames is proposed for the flame lif...
A theoretical analysis of turbulent jet diffusion flames is developed in which the flame is regarded...
The boundary-layer approximation is used to describe the frozen mixing process taking place when a f...
The boundary-layer approximation is used to describe the frozen mixing process taking place when a f...
The liftoff characteristics of autoignited laminar dimethyl ether (DME) jet flames in heated coflow ...
This work reports experimental results from laminar-to-turbulent lifted jet diffusion flames. Charac...