Topics
perovskiteChemical substance
sinteringElection
oxygenChemical substance
sinteredElection
porositySoftware
In this research we investigated the sintering behavior of (La 0.9Sr0.1)0.95Cr0.85Mg 0.1Ni0.05O3 perovskite which is a potential candidate material for enhancing the oxidation reactions in oxygen separation and syngas production. It was found that solid state sintering occurs as a single step event and it was possible to produce gas tight ceramics after using cold isostatic pressing followed by sintering at 1700°C in air. Grain size, porosity, and lattice parameter measurements of the presureless sintered ceramics were performed as a function of sintering temperature. A small amount of secondary phases was also detected by XRD and EDS analysis. © 2007 Materials Research Society
Calcium doped lanthanum chromite has suitable properties for use as a solid oxide fuel cell intercon...
Ceramics oxides with mixed ionic and electronic conductivity have received a lot of attention due to...
Solid Oxide Fuel Cells have attracted much attention over the past few decades due to their huge pot...
In this research we investigated the sintering behavior of (La 0.9Sr0.1)0.95Cr0.85Mg 0.1Ni0.05O3 per...
The sintering behavior and structural changes of fluorite Gd 0.2Ce0.8O2-δ (GDC) mixed with one of th...
The solid solutions of La1-xCaxCr1-yCoyO3 were investigated in an effort to develop an interconnect ...
International audienceThe thermo-mechanical behaviours of La0.8Sr0.2Fe1−xGaxO3−δ (x=0 or x = 0.3) ce...
Mixed conducting La1-xSrxCo1-yFeyO3-delta (LSFC) perovskites are promising materials for oxygen sepa...
High purity raw materials are used for synthesizing La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF6428) powders ...
Perovskites on the basis of LaCrO3 are of interest as ceramic interconnect materials for the develop...
In this work, the effects of sintering temperature on the phase structure, oxygen nonstoichiometry, ...
Perovskite membranes have the potentials to be applied in a novel cost-effective technology for air ...
The objective of this work is to identify optimum synthesis, compacting and sintering conditions in ...
AbstractOur study investigates the influence of sintering temperature on the microstructure (grain s...
In order to improve the sinterability of LaCrO_3, which is one of candidate materials for interconne...
Calcium doped lanthanum chromite has suitable properties for use as a solid oxide fuel cell intercon...
Ceramics oxides with mixed ionic and electronic conductivity have received a lot of attention due to...
Solid Oxide Fuel Cells have attracted much attention over the past few decades due to their huge pot...
In this research we investigated the sintering behavior of (La 0.9Sr0.1)0.95Cr0.85Mg 0.1Ni0.05O3 per...
The sintering behavior and structural changes of fluorite Gd 0.2Ce0.8O2-δ (GDC) mixed with one of th...
The solid solutions of La1-xCaxCr1-yCoyO3 were investigated in an effort to develop an interconnect ...
International audienceThe thermo-mechanical behaviours of La0.8Sr0.2Fe1−xGaxO3−δ (x=0 or x = 0.3) ce...
Mixed conducting La1-xSrxCo1-yFeyO3-delta (LSFC) perovskites are promising materials for oxygen sepa...
High purity raw materials are used for synthesizing La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF6428) powders ...
Perovskites on the basis of LaCrO3 are of interest as ceramic interconnect materials for the develop...
In this work, the effects of sintering temperature on the phase structure, oxygen nonstoichiometry, ...
Perovskite membranes have the potentials to be applied in a novel cost-effective technology for air ...
The objective of this work is to identify optimum synthesis, compacting and sintering conditions in ...
AbstractOur study investigates the influence of sintering temperature on the microstructure (grain s...
In order to improve the sinterability of LaCrO_3, which is one of candidate materials for interconne...
Calcium doped lanthanum chromite has suitable properties for use as a solid oxide fuel cell intercon...
Ceramics oxides with mixed ionic and electronic conductivity have received a lot of attention due to...
Solid Oxide Fuel Cells have attracted much attention over the past few decades due to their huge pot...
Add to ORKG