The residual stresses within a deformation band in a ceria-stabilized tetragonal zirconia/alumina (Ce-TZP/Al2O3) ceramic composite are measured by piezo-spectroscopy, in the zirconia phases from their Raman spectra and in the alumina phase from its Cr3+ fluorescence. The concentrations of monoclinic zirconia across the deformation band are obtained from Raman spectra recorded from locations across the band. These measurements show that the deformation bands are associated with a localization of the tetragonal-to-monoclinic transformation and that although the overall residual stress in the bands is compressive, the tensile stress in the tetragonal zirconia phase is enhanced. The experimental data are compared with the predictions of a stoch...
International audienceZirconia based bio-ceramics such as ZTA (Zirconia-toughened alumina) composite...
Ceramic-metal functionally graded materials (FGMs) have been extensively used in aerospace engineeri...
15Ceramics and their composites are in general brittle materials because they are predominantly made...
Samples of zirconia-toughened alumina (ZTA) with very small amounts of strontium hexaluminate have b...
Measurements of the residual stresses in Al2O3/Ce-TZP (12 mol% CeO2) sintered composites, containing...
Alumina/ceria-stabilized zirconia bars tested in four-point bending exhibited deformation bands on t...
The stresses of laminate structures obtained by joining single layers of pure alumina (A), pure yttr...
The grain size (GS) and volume fraction of alumina have been systematically varied in composites wit...
Alumina, 10% and 20% ZTA with 1.5mol% yttria stabiliser were subjected to Vickers indentation testin...
Zirconia-toughened alumina cutting tools have been examined after machining an AISI 1040 steel. The ...
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive m...
In this study displacement of monoclinic bands of zirconia were investigated in the function of oxid...
The authors used micro-Raman spectroscopy to monitor the ferroelectric (FE) to antiferroelectric (AF...
Ceramic matrix composites consisting of partially stabilized zirconia with 5 % and 10 % by volume un...
AbstractAlumina, 10% and 20% ZTA with 1.5mol% yttria stabiliser were subjected to Vickers indentatio...
International audienceZirconia based bio-ceramics such as ZTA (Zirconia-toughened alumina) composite...
Ceramic-metal functionally graded materials (FGMs) have been extensively used in aerospace engineeri...
15Ceramics and their composites are in general brittle materials because they are predominantly made...
Samples of zirconia-toughened alumina (ZTA) with very small amounts of strontium hexaluminate have b...
Measurements of the residual stresses in Al2O3/Ce-TZP (12 mol% CeO2) sintered composites, containing...
Alumina/ceria-stabilized zirconia bars tested in four-point bending exhibited deformation bands on t...
The stresses of laminate structures obtained by joining single layers of pure alumina (A), pure yttr...
The grain size (GS) and volume fraction of alumina have been systematically varied in composites wit...
Alumina, 10% and 20% ZTA with 1.5mol% yttria stabiliser were subjected to Vickers indentation testin...
Zirconia-toughened alumina cutting tools have been examined after machining an AISI 1040 steel. The ...
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive m...
In this study displacement of monoclinic bands of zirconia were investigated in the function of oxid...
The authors used micro-Raman spectroscopy to monitor the ferroelectric (FE) to antiferroelectric (AF...
Ceramic matrix composites consisting of partially stabilized zirconia with 5 % and 10 % by volume un...
AbstractAlumina, 10% and 20% ZTA with 1.5mol% yttria stabiliser were subjected to Vickers indentatio...
International audienceZirconia based bio-ceramics such as ZTA (Zirconia-toughened alumina) composite...
Ceramic-metal functionally graded materials (FGMs) have been extensively used in aerospace engineeri...
15Ceramics and their composites are in general brittle materials because they are predominantly made...