Description of Testing in Wavelet Video Coding

The provided testing scenario is intended to be used for evaluation of the coding performance of the JSVM coding scheme provided by JVT, with respect to the Exploration Wavelet Video Coding platform. The reference conditions have been derived from the JSVM testing conditions document JVT-P205 produced at the 16th JVT meeting in Poznan. Further details on JSVM configuration can be found in such document. The rate points to be used in all tests are derived from the combined scalability test sets. The applicable set of rate points is similar to the rate points originally applied in the Munich and Palma testing conditions. The target rates are arranged in a systematic manner. For each spatio-temporal resolution, the rate triples from the lowest rate point to the highest rate point. The settings are chosen such that an AVC compatible base layer can be provided for the base layer of combined and spatial scalability and for the QCIF sequences in the SNR scalability scenario. The encoder will generate embedded bit-streams. To extract the various bit-rates, frame-rates and resolutions specified in the tables below from the embedded bit-stream, an extractor shall be used. No transcoding is allowed for performing the decoding at the various bit-rates, frame-rates and resolutions. In the combined scalability settings, the testing addresses a broad range scalability and is motivated by the requirements of applications such as surveillance, broadcast and storage systems. This scenario is represented by the test sequences CITY, CREW, HARBOUR and SOCCER. Visual tests shall take place for the rates shown in green in the tables below for each spatial resolution, and for the Palma test at the rate points tested at Palma. PSNR curves will have to be provided for all other rate points