Density measurements of the systems CO 2 + CH 4 at T = 304.21 K and CO 2 + CO at T = 304.21 and 308.15 K were carried out at pressures and compositions of interest in the process of transport and storage of CO 2 (CCS technology): P = 0.1 to 20 MPa, and xCO 2 ≥0.97. From the experimental P––T –xCO 2 data, we have studied the dependence of the isothermal compressibility, the excess molar volume, and the par- tial molar volume of the solute with composition, pressure and temperature within the critical region. We have modelled the volumetric behaviour of these systems with Peng–Robinson, PC-SAFT and GERG Equations of State, thus validating these equations under the conditions considered. Furthermore, we have confirmed the weakly attractive beh...
Aluminon has been investigated for the separation of iron(III) by flotation technique. This reagent ...
A new method for determining the Ni0 metal surface area of MgO supported catalysts is proposed. Diff...
In this work, an optimization proposal for a model based on the definition of regions for crack prop...
Commercial refrigeration has undergone significant changes in recent years. In the European market, ...
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Un...
Electron–electron (e–e) collisions can impact transport in a variety of surprising and sometimes cou...
LaNiO₃ perovskite was prepared by the selfcombustion method and tested as catalyst for CH4 activatio...
Repetitive enrichment of soils samples from an agricultural land and newly marked dumpsite on elect...
Novel phosphorylated derivatives of stavudine were synthesized by the reaction of bis(2-chloroethyl)...
Thermochemical storage systems offer in theory promising advantages for a wide range of applications...
Convection induced in a layer of liquid with a top free surface by a distribution of heating element...
We report a bipolar field effect tunneling transistor that exploits to advantage the low density of ...
This paper performs technical, economic and environmental feasibility analyses of two different sola...
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. In this report, we explore the use of supe...
In a fusion reactor, a continuous erosion of the Plasma Facing Surfaces (PFSs) occurs during normal ...
Aluminon has been investigated for the separation of iron(III) by flotation technique. This reagent ...
A new method for determining the Ni0 metal surface area of MgO supported catalysts is proposed. Diff...
In this work, an optimization proposal for a model based on the definition of regions for crack prop...
Commercial refrigeration has undergone significant changes in recent years. In the European market, ...
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Un...
Electron–electron (e–e) collisions can impact transport in a variety of surprising and sometimes cou...
LaNiO₃ perovskite was prepared by the selfcombustion method and tested as catalyst for CH4 activatio...
Repetitive enrichment of soils samples from an agricultural land and newly marked dumpsite on elect...
Novel phosphorylated derivatives of stavudine were synthesized by the reaction of bis(2-chloroethyl)...
Thermochemical storage systems offer in theory promising advantages for a wide range of applications...
Convection induced in a layer of liquid with a top free surface by a distribution of heating element...
We report a bipolar field effect tunneling transistor that exploits to advantage the low density of ...
This paper performs technical, economic and environmental feasibility analyses of two different sola...
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. In this report, we explore the use of supe...
In a fusion reactor, a continuous erosion of the Plasma Facing Surfaces (PFSs) occurs during normal ...
Aluminon has been investigated for the separation of iron(III) by flotation technique. This reagent ...
A new method for determining the Ni0 metal surface area of MgO supported catalysts is proposed. Diff...
In this work, an optimization proposal for a model based on the definition of regions for crack prop...