Design of Reinforced Concrete Plates

Tema završnog rada je proračun armiranobetonskih ploča. Temeljem dobivenih teorijskih i numeričkih rezultata bilo je potrebno prikazati ponašanje armiranobetonske ploče i grede u građevinskim konstrukcijama što je i cilj ovog završnog rada. Teorijski je objašnjeno ponašanje i funkcija ploča nosivih u jednom smjeru, ploča nosivih u dva ortogonalna smjera i ponašanje kontinuiranih ploča. U statičkom proračunu provedeno je dimenzioniranje na moment savijanja i na poprečne sile. Izračunata je potrebna minimalna i maksimalna armatura te odabrana zadovoljavajuća koja se ugrađuje u ploču i gredu. Na temelju statičkog proračuna dobiven je iskaz i plan armature za navedene konstrukcije.The topic of the final paper is the calculation of reinforced concrete plates. Based on the obtained theoretical and numerical results, it was necessary to present the behavior of reinforced concrete plate and beam in building structures, which is the goal of this final paper. The behavior and function of plates bearing in one direction, plates bearing in two orthogonal directions and waving continuous plates are theoretically explained. In the staticcalculation, dimensioning was performed at the bending moment and at transverse forces. The required minimum and maximum reinforcement is calculated and selected appropriate which is built into the plate ande beam. Based on static calculation the spark and the reinforcement plan for the mentioned structures were obtained