Advanced bainitic steels with the multiphase structure of bainitic ferrite, retained austenite and marten-site exhibit distinctive fatigue crack initiation behavior during high cycle fatigue/very high cycle fatigue (HCF/VHCF) regimes. The subsurface microstructural fatigue crack initiation, referred to as "non-inclusion induced crack initiation, NIICI", is a leading mode of failure of bainitic steels within the HCF/VHCF regimes. In this regard, there is currently a missing gap in the knowledge with respect to the cyclic response of multiphase structure during VHCF failure and the underlying mechanisms of fatigue crack initiation during VHCF. To address this aspect, we have developed a novel approach that explicitly identi-fies the knowledge...
While fatigue is ubiquitous and is responsible for a large proportion of failure in engineering stru...
AbstractIt is well known, that high-strength steels do not show a classical fatigue limit and failur...
AbstractDimensioning of high-strength steels relies on the knowledge of Wöhler-type S/N data and the...
Advanced bainitic steels with the multiphase structure of bainitic ferrite, retained austenite and m...
AbstractNowadays, the most modern bainitic steels are designed with much reduced carbon and other al...
AbstractNowadays, the most modern bainitic steels are designed with much reduced carbon and other al...
In the present paper, the behavior of fatigue microcracks is studied in a high-strength bainitic ste...
AbstractIn the very high cycle fatigue (VHCF) regime, fatigue damage starts by the formation of slip...
Abstract Besides “fish eye”, subsurface non-defect fatigue crack origin (SNDFCO) in the matrix is an...
While fatigue is ubiquitous and is responsible for a large proportion of failure in engineering stru...
High-cycle fatigue (HCF) behaviors of medium-carbon bainitic steels with various inclusion sizes and...
A bainite/martensite (B/M) multiphase steel was treated by a novel bainite-based Q-P-T treatment wit...
AbstractIn recent years, the high tensile steels have got much attention in steel structural fields....
AbstractThe fatigue crack initiation mechanisms prevalent in high strength martensitic steel grades,...
In order to study the subsurface crack initiation and propagation mechanism of high strength steel u...
While fatigue is ubiquitous and is responsible for a large proportion of failure in engineering stru...
AbstractIt is well known, that high-strength steels do not show a classical fatigue limit and failur...
AbstractDimensioning of high-strength steels relies on the knowledge of Wöhler-type S/N data and the...
Advanced bainitic steels with the multiphase structure of bainitic ferrite, retained austenite and m...
AbstractNowadays, the most modern bainitic steels are designed with much reduced carbon and other al...
AbstractNowadays, the most modern bainitic steels are designed with much reduced carbon and other al...
In the present paper, the behavior of fatigue microcracks is studied in a high-strength bainitic ste...
AbstractIn the very high cycle fatigue (VHCF) regime, fatigue damage starts by the formation of slip...
Abstract Besides “fish eye”, subsurface non-defect fatigue crack origin (SNDFCO) in the matrix is an...
While fatigue is ubiquitous and is responsible for a large proportion of failure in engineering stru...
High-cycle fatigue (HCF) behaviors of medium-carbon bainitic steels with various inclusion sizes and...
A bainite/martensite (B/M) multiphase steel was treated by a novel bainite-based Q-P-T treatment wit...
AbstractIn recent years, the high tensile steels have got much attention in steel structural fields....
AbstractThe fatigue crack initiation mechanisms prevalent in high strength martensitic steel grades,...
In order to study the subsurface crack initiation and propagation mechanism of high strength steel u...
While fatigue is ubiquitous and is responsible for a large proportion of failure in engineering stru...
AbstractIt is well known, that high-strength steels do not show a classical fatigue limit and failur...
AbstractDimensioning of high-strength steels relies on the knowledge of Wöhler-type S/N data and the...