The kinetics of precipitation of secondary phases in a duplex stainless steel (SAF 2205) after isothermal and continuous cooling treatment were investigated. The evolution of the phases chemical composition in relation with time and cooling rate is presented
The isothermally aged 2510 duplex stainless steel is very prone to sigma nad chi precipitationn for ...
Due to thermal effects, several precipitation and segregation processes are known in duplex stainles...
Duplex and superduplex stainless steels are prone to secondary phases (sigma, chi, nitrides, seconda...
In this paper the results of secondary phases determination in a SAF 2205 duplex steel, heat treated...
In the present paper the results of secondary phases determination and quantification in ZERON100 du...
The use of duplex stainless steels is limited by their susceptibility to the formation of dangerous ...
This paper concerns the phase transformation induced by heat treatment and cold rolling in four dupl...
An ATEM study of the precipitation of secondary phases in the temperature range of 600-800°C was und...
A duplex stainless steel (DSS) containing nominally 22Cr, 5Ni, 3.2Mo and 1.5Mn has been investigated...
the formation of secondary phases during isothermal treatments in the range 750-1000 °C and continuo...
In this work, the non-isothermal dissolution kinetics of the sigma phase in duplex stainless steels ...
Sigma phase is well known as a detrimental phase that causes considerable reduction in plasticity an...
This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS...
Sigma phase is known to reduce the mechanical properties and corrosion resistance of duplex and supe...
The effect of isothermal heat treatments at 475, 700, and 870°C on the localized corrosion susceptib...
The isothermally aged 2510 duplex stainless steel is very prone to sigma nad chi precipitationn for ...
Due to thermal effects, several precipitation and segregation processes are known in duplex stainles...
Duplex and superduplex stainless steels are prone to secondary phases (sigma, chi, nitrides, seconda...
In this paper the results of secondary phases determination in a SAF 2205 duplex steel, heat treated...
In the present paper the results of secondary phases determination and quantification in ZERON100 du...
The use of duplex stainless steels is limited by their susceptibility to the formation of dangerous ...
This paper concerns the phase transformation induced by heat treatment and cold rolling in four dupl...
An ATEM study of the precipitation of secondary phases in the temperature range of 600-800°C was und...
A duplex stainless steel (DSS) containing nominally 22Cr, 5Ni, 3.2Mo and 1.5Mn has been investigated...
the formation of secondary phases during isothermal treatments in the range 750-1000 °C and continuo...
In this work, the non-isothermal dissolution kinetics of the sigma phase in duplex stainless steels ...
Sigma phase is well known as a detrimental phase that causes considerable reduction in plasticity an...
This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS...
Sigma phase is known to reduce the mechanical properties and corrosion resistance of duplex and supe...
The effect of isothermal heat treatments at 475, 700, and 870°C on the localized corrosion susceptib...
The isothermally aged 2510 duplex stainless steel is very prone to sigma nad chi precipitationn for ...
Due to thermal effects, several precipitation and segregation processes are known in duplex stainles...
Duplex and superduplex stainless steels are prone to secondary phases (sigma, chi, nitrides, seconda...