Naturally-Made Hard Containers for Food Packaging: Actual and Future Perspectives

The huge amount of plastic used in packaging application and the related problems of disposal of the packaging after its use have gained research and industrial interest in both bio-based polymers that are not biodegradable but produced by renewable resources and bio-based compostable polymers, to be used for production of packaging. The production of bio-polymers is more costly than that of conventional fossil fuel-based polymers. Moreover, the range of applications of polymers derived from natural sources was limited due to difficulties in processing natural materials, moisture sensitivity, incompatibility at the interface between natural fillers and polymeric matrices, possible toxicity related to natural material degradation, poor mechanical properties, etc. Mass transfer properties are very important for packaging application, and at present, bio-based packaging generally lacks in maintaining barrier properties compared to traditional petro-derived polymers. The combination of traditional polymers and biodegradable ones in multilayer systems allowed obtaining a good balance of mass transfer properties, but the presence of the non-biodegradable layer negatively affects, and in some cases compromises, the composting of the final packaging. Recent advances in technology are reducing the cost of manufacturing bio-based plastics and are producing materials with an expanded range of properties that has made them suitable for low cost and high demanding applications such as packaging. Chemical modifications of the bio-based polymers, as well as blending with biodegradable additives or polymers are the preferred solutions to improve and control the properties of these materials. In this work, several materials derived from biomasses such as polyesters (poly lactic acid, poly hydroxyl alkanoates), polysaccharides (starch), vegetal and animal proteins, etc., which can be used in hard packaging applications are reviewed. Modification and processing of bio-based products with additives, polymers and natural fibers (cellulose, wood fibers, etc.) are discussed as well. The suitability of these materials for the industrial processing required for the production of hard food packaging is reported critically in order to evidence the challenges and perspectives for polymers derived from renewable resources to be applied in this sector