Dispersion of Micro Fibrillated Cellulose ({MFC}) in Poly(lactic acid) ({PLA}) from Lab-Scale to Semi-Industrial Processing Using Biobased Plasticizers as Dispersing Aids

In the present study, two commercial typologies of microfibrillated cellulose (MFC) (Exilva and Celish) with 2% wt % were firstly melt-compounded at the laboratory scale into polylactic acid (PLA) by a microcompounder. To reach an MFC proper dispersion and avoid the well-known aglomeration problems, the use of two kinds of biobased plasticisers (poly(ethylene glycol) (PEG) and lactic acid oligomer (OLA)) were investigated. The plasticizers had the dual effect of dispersing the MFC, and at the same time, they counterbalanced the excessive stiffness caused by the addition of MFC to the PLA matrix. Several preliminaries dilution tests, with different aqueous cellulose suspension/plasticizer weight ratios were carried out. These tests were accompanied by SEM observations and IR and mechanical tests on compression-molded films in order to select the best plasticizer content. The best formulation was then scaled up in a semi-industrial twin-screw extruder, feeding the solution by a peristaltic pump, to optimize the industrial-scale production of commercial MFC-based composites with a solvent-free method. From this study, it can be seen that the use of plasticisers as dispersing aids is a biobased and green solution that can be easily used in conventional extrusion techniques