Mechanical design and deployment of a quasi-rhombic pyramid drag sail for safe de-orbit of a 3U CubeSat

Orbital debris is rapidly becoming a more prevalent and alarming obstacle that, without immediate intervention, will undoubtedly become disastrous for human activity in space. The University of Glasgow’s microsatellite society, GU Orbit, has taken action to equip its 3U CubeSat ASTRAEUS-01 with a drag sail de-orbit device. This payload represents a simple and low-cost solution for the mitigation of debris in Low Earth Orbit (LEO) and is expected de- orbit the CubeSat within 12 to 24 months, depending on solar activity. These aspects are deemed fundamental for the mission and align with GU Orbit’s ethics of promoting space sustainability and accessibility. As a student society, the aim of this research is to demonstrate the viability of a drag sail technology in the absence of large monetary investment.a In this article, the studies on the structure, material and Hold-Down and Release Mechanism (HDRM) of the drag sail system are evaluated and briefly discussed. The discussion starts by illustrating the 7m2 quasi-rhombic drag sail that will deploy to increase the satellite's atmospheric drag and allow the spacecraft to lose altitude and re-enter the atmosphere. Various aspects of the geometry and folding technique used to fit the drag sail on the CubeSat are analysed. Phenomena of material degradation such as thermal and oxygen degradation have been accounted for in the design to mitigate their effect over the duration of the mission. Tape spring booms coiled around a spool will release the drag sail from its folded state maintained throughout the mission. These have been dimensioned through a mathematical model in order to provide optimum deployment dynamics for the drag sail. The paper describes also how a simple and economic nichrome burn-wire HDRM has been integrated with the drag sail design to trigger the release sequence of the cover doors and the drag sail itself