STAR-XL: student transponder for satellite Ranging on X & L-band

The ESA ESEO Mission [1] included an amateur radio payload [2]. The results of which included the development of radio technologies that utilised final year student projects over a 5 year period. Many lessons regarding compliance and process enabled a new payload to follow: the Student Ranging Transponder Radio for X-band and L-band (or STAR-XL). The STAR-XL design leverages key aspects of the ESEO payload design for a generic CubeSat platform; including TT&C voltage and current sense circuitry, receiver circuitry, and flight software. But instead of a maximum 4800 bps telemetry and transponder system - the STAR- XL targets a 100 kHz bandwidth system that will allow faster downlink rates that are forward error correction, link margin and modulation order dependent. With 100 kHz bandwidth, the linear receiver is designed to also operate as a transponder - enabling ranging and navigation applications such as orbit determination and further experiments from amateur radio groundstations. This paper details the recent student project efforts in three key areas: a new STM32-based on-board computer, an X-band up-converter board and dual X/L band patch (as shown in Fig. 1). The new OBC includes an IQ modulator for transmitting complex waveforms and an optimised flight software suite that takes advantage of dual DMA hardware on-chip to reduce overheads. The X-band upconverter board required the development of new safety interlock and RF chain circuitry on a Rogers (RO4350B) PCB material. A new dual X/L-band patch antenna and filter circuit is also built and measured. Each of these projects has led to new lessons and increased the real-world case studies used to teach spacecraft avionics