Design, Implementation and Evaluation of a Low Redundant Error Correction Code

[EN] The continuous raise in the integration scale of CMOS technology has provoked an augment in the fault rate. Particularly, computer memory is affected by Single Cell Upsets (SCU) and Multiple Cell Upsets (MCU). A common method to tolerate errors in this element is the use of Error Correction Codes (ECC). The addition of an ECC introduces a series of overheads: silicon area, power consumption and delay overheads of encoding and decoding circuits, as well as several extra bits added to allow detecting and/or correcting errors. ECC can be designed with different parameters in mind: low redundancy, low delay, error coverage, etc. The idea of this paper is to study the effects produced when adding an ECC to a microprocessor with respect to overheads. Usually, ECC with different characteristics are continuously proposed. However, a great quantity of these proposals only present the ECC, not showing its behavior when using them in a microprocessor. In this work, we present the design of an ECC whose main characteristic is a low number of code bits (low redundancy). Then, we study the overhead this ECC introduces. Firstly, we show a study of silicon area, delay and power consumption of encoder and decoder circuits, and secondly, how the addition of this ECC affects to a RISC microprocessor.© 2021 IEEE. Personal use of this material is permitted. Permissíon from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertisíng or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Gracia-Morán, J.; Saiz-Adalid, L.; Baraza-Calvo, J.; Gil Tomás, DA.; Gil, P. (2021). Design, Implementation and Evaluation of a Low Redundant Error Correction Code. IEEE Latin America Transactions. 19(11):1903-1911. https://doi.org/10.1109/TLA.2021.947562419031911191