The analysis of heat transfer of the eco pozzolan mixture with concrete at high temperatures

The purpose of this project is to conduct the analysis of heat transfer of the eco pozzolan mixture with concrete at high temperatures, and to compare the performance of EPP Class C (ASTM C618) to the basic concrete mix. As well as how much the performance of EPP in ratio to the OPC gives the better or no less results, and lastly how combining two aggregates somehow gives best heat transfer performance to the set. The lower heat transfer, the better heat insulation of the concrete will be, and the longer time taken for inner and outer wall be same also shows the better insulation of the concrete will be. Next, this set is conducted in cylinder form of mould because of same heat dissipation and flows into the concrete. Measuring the heat differences using Dual Channel Thermocouple, where T2 is at the outer wall of the cylinder and T1 is in the inner wall of the cylinder. Heating process experiment will be conducted in furnace oven with setting of 300˚C. But aware that this experiment has not been done in thermal conductivity test experiment before proceeding with the experiment. Using citation and summary from selected journal for basic concrete and pozzolana concrete with its own OPC/water ratio good enough to assume and taking consideration to use the thermal conductivity for this experiment