Collision Avoidance Energy Efficient Multi-Channel MAC Protocol for UnderWater Acoustic Sensor Networks

International audienceCollisions in underwater acoustic networks can not be tolerated due to the fundamental differences between underwater acoustic propagation and terrestrial radio propagation. Thus conceiving medium access protocols that avoid collision to the most possible extent is of paramount importance. In this paper, a multi-channel MAC protocol, MC-UWMAC, especially designed for underwater acoustic sensor networks, is proposed and evaluated. MC-UWMAC is an energy efficient MAC protocol that aims at achieving a collision free communication. MC-UWMAC operates on a single slotted control channel to avoid the missing receiver problem and multiple data channels to improve the network throughput. To guarantee to the most possible extent a collision free communication, MC-UWMAC uses two key newly designed procedures: i) a grid based slot assignment procedure on the common slotted control channel that approaches the 2-hop conflict free slot assignment and ii) a quorum based data channel allocation procedure. More precisely, according to MC-UWMAC, a sender uses its own dedicated slot on the common control channel for handshaking with an intended neighbor receiver. However, data transmission takes place in a unique data channel especially reserved for this pair of neighbor nodes. In fact, MC-UWMAC reserves for each pair of neighbor nodes a unique data channel that aims at being 2-hop conflict free. As such, the probability of collision is highly reduced and even completely mitigated in some scenarios. In addition, by using multiple channels, MC-UWMAC allows multiple data communications along with handshaking on the common control channel to take place at the same time and hence the network throughput as well as energy efficiency are improved. Simulation results show that MC-UWMAC can greatly improve the network performance especially in terms of energy consumption, throughput and end-to-end delay