Add to ORKGA new model for predicting microstructural evolution and mechanical properties as the result of ageing of cast Aluminium alloys is presented
Aluminum-silicon-copper-magnesium casting alloys, such as Al-319, have high strength-to-weight ratio...
Yield strength (YS) ageing curves have been modelled for A356 and A357 aluminium casting alloys belo...
Thermomechanical treatments of age-hardenable wrought aluminium alloys provoke microstructural chang...
Paper presented at the 7th European Conference EUROMAT 2001, Rimini, 10-14 june 2001International au...
The evolution of microstructure and mechanical properties during heat treatment of an industrially-c...
Environmental savings can be made by increasing the use of aluminium alloys in the automotive indust...
The constitutive behaviour of the aluminium-copper casting alloy B206 has been investigated in both ...
This master’s thesis focuses on the heat treatment of the aluminium alloy AlSi7Mg0,6 and also invest...
SIGLEAvailable from British Library Document Supply Centre- DSC:9106.17(CUED/C-MATS/TR--156) / BLDSC...
Age-hardenable aluminum alloys are widely used in the automotive industry. These alloys are classifi...
Heat treatment is an essential process step in the final adjustment of the mechanical properties of ...
A recently developed unified constitutive model for creep-ageing of an Al-Cu-Li alloy (AA2050-T34) h...
Heat treatment of aluminum casts is necessary for achieving the desired properties of casts. Heat tr...
Environmental savings can be made by increasing the use of aluminum alloys in the automotive industr...
Yield strength (YS) ageing curves have been modelled for A356 and A357 aluminium casting alloys belo...
Aluminum-silicon-copper-magnesium casting alloys, such as Al-319, have high strength-to-weight ratio...
Yield strength (YS) ageing curves have been modelled for A356 and A357 aluminium casting alloys belo...
Thermomechanical treatments of age-hardenable wrought aluminium alloys provoke microstructural chang...
Paper presented at the 7th European Conference EUROMAT 2001, Rimini, 10-14 june 2001International au...
The evolution of microstructure and mechanical properties during heat treatment of an industrially-c...
Environmental savings can be made by increasing the use of aluminium alloys in the automotive indust...
The constitutive behaviour of the aluminium-copper casting alloy B206 has been investigated in both ...
This master’s thesis focuses on the heat treatment of the aluminium alloy AlSi7Mg0,6 and also invest...
SIGLEAvailable from British Library Document Supply Centre- DSC:9106.17(CUED/C-MATS/TR--156) / BLDSC...
Age-hardenable aluminum alloys are widely used in the automotive industry. These alloys are classifi...
Heat treatment is an essential process step in the final adjustment of the mechanical properties of ...
A recently developed unified constitutive model for creep-ageing of an Al-Cu-Li alloy (AA2050-T34) h...
Heat treatment of aluminum casts is necessary for achieving the desired properties of casts. Heat tr...
Environmental savings can be made by increasing the use of aluminum alloys in the automotive industr...
Yield strength (YS) ageing curves have been modelled for A356 and A357 aluminium casting alloys belo...
Aluminum-silicon-copper-magnesium casting alloys, such as Al-319, have high strength-to-weight ratio...
Yield strength (YS) ageing curves have been modelled for A356 and A357 aluminium casting alloys belo...
Thermomechanical treatments of age-hardenable wrought aluminium alloys provoke microstructural chang...