In this work the microstructural evolution of an A360 alloy reinforced with 10vol.% SiC particulate is described. During the material solidification, mechanical vibration, in the range of 0-41 times the gravity acceleration, g, has been applied to a steel die. It has been observed that vibrations can promote a quite homogeneous SiC dispersion on macroscopic scale. On the other hand, by using too high vibrations\u2019 intensity, segregation phenomena have been pointed out in the castings. Furthermore, it has been evidenced that the reinforcement distribution is influenced by mechanical entrapment of the particles at grain boundaries and in the interdendritic channel. The metallographic analysis has emphasized a finer microstructure with incr...
This paper is concerned with the influence of vibration on the cooling slope casting and gravity cas...
The thermo-mechanical behavior of aluminum alloys reinforced with SiC particles was investigated by ...
A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatm...
Metal matrix composites are engineered materials which are a combination of two or more materials, o...
Metal matrix composites are engineered materials which are a combination of two or more materials, o...
In the present investigation, the solidification microstructure of Al based composites was studied. ...
Aluminum-Silicon and Aluminum-Copper alloys are important non-ferrous casting alloys. Different meth...
In order to achieve better performance from alloy,manufactures may alter the alloy composition or th...
In order to achieve better performance from alloy, manufactures may alter the alloy composition or t...
The effects of subjecting solidifying particulate reinforced aluminium alloy matrix composite to var...
In order to achieve better performance from alloy, manufactures may alter the alloy composition or t...
Advances in materials such as Metal Matrix Composite (MMC) are rapidly developed due to demands and ...
The effect of low-frequency mechanical vibration, applied during the solidification process, on the ...
Al-Si based alloys are the most important nonferrous alloys. These alloys were enormously used in va...
A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatm...
This paper is concerned with the influence of vibration on the cooling slope casting and gravity cas...
The thermo-mechanical behavior of aluminum alloys reinforced with SiC particles was investigated by ...
A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatm...
Metal matrix composites are engineered materials which are a combination of two or more materials, o...
Metal matrix composites are engineered materials which are a combination of two or more materials, o...
In the present investigation, the solidification microstructure of Al based composites was studied. ...
Aluminum-Silicon and Aluminum-Copper alloys are important non-ferrous casting alloys. Different meth...
In order to achieve better performance from alloy,manufactures may alter the alloy composition or th...
In order to achieve better performance from alloy, manufactures may alter the alloy composition or t...
The effects of subjecting solidifying particulate reinforced aluminium alloy matrix composite to var...
In order to achieve better performance from alloy, manufactures may alter the alloy composition or t...
Advances in materials such as Metal Matrix Composite (MMC) are rapidly developed due to demands and ...
The effect of low-frequency mechanical vibration, applied during the solidification process, on the ...
Al-Si based alloys are the most important nonferrous alloys. These alloys were enormously used in va...
A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatm...
This paper is concerned with the influence of vibration on the cooling slope casting and gravity cas...
The thermo-mechanical behavior of aluminum alloys reinforced with SiC particles was investigated by ...
A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatm...